Teledyne-lecroy OE695G User Manual

Operator’s Manual OE695G Optical-to-Electrical Converter

OE695G Optical-to-Electrical Converter 4 922562-00 Rev A Do not apply a voltage to any input that exceeds the maximum rating of that input. Refer to t

Instruction Manual 922562-00 Rev A 5 Operation Connecting the Unit to the Oscilloscope To connect the optical to electrical converter to the Teledyne

OE695G Optical-to-Electrical Converter 6 922562-00 Rev A Channel Dialog When the OE695G is connected to a particular channel, the respective Channel d

Instruction Manual 922562-00 Rev A 7 Reference Receiver The OE695G contains optional, built-in software reference receiver filters for common Fiber Ch

OE695G Optical-to-Electrical Converter 8 922562-00 Rev A Input Selection for Optical Wavelength There are four standard optical wavelength selections

Instruction Manual 922562-00 Rev A 9 Performance Verification Tests CW Gain Required Equipment  OE695G and compatible oscilloscope  CW laser sourc

OE695G Optical-to-Electrical Converter 10 922562-00 Rev A statistical mean value of the mean measurement, note the Residual Dark Level:___________ uW

Instruction Manual 922562-00 Rev A 11 5. Configure the following settings: a. Recall Default setup b. Enable the channel with the OE695G, disable o

OE695G Optical-to-Electrical Converter 12 922562-00 Rev A Freq/Fr 4BT Ideal Response (dBe) Allowed Tolerance (dB) Max Limit (dBe) Min Limit (dBe) 0 0

Instruction Manual 922562-00 Rev A 13  Check the power connector is plugged in and locked, and the SMA cable is connected. Returning a Product for C

OE695G Optical-to-Electrical Converter 14 922562-00 Rev A 8. If returning a product to a different country, also:  Mark shipments returned for serv

Instruction Manual 922562-00 Rev A 15 Safety Compliance The accessory meets intent of EC Directive 2006/95/EC for Product Safety. Compliance was demon

OE695G Optical-to-Electrical Converter 16 922562-00 Rev A Contact Teledyne LeCroy Teledyne LeCroy Service Centers United States and Canada - World Wi

OE695G Optical-to-Electrical Converter Operator’s Manual April 2013

OE695G Optical-to-Electrical Converter Operator’s Manual © 2013 Teledyne LeCroy, Inc. All rights reserved. Unauthorized duplication of Teledyne

Operator’s Manual 922562-00 Rev A i WARRANTY Teledyne LeCroy warrants this oscilloscope accessory for normal use and operation within specification fo

OE695G Optical-to-Electrical Converter ii 922562-00 Rev A TABLE OF CONTENTS OE695G Overview ...

Instruction Manual 922562-00 Rev A 1 OE695G Overview The OE695G is designed to help troubleshoot optical-to-electrical signal integrity issues at the

OE695G Optical-to-Electrical Converter 2 922562-00 Rev A Key Features:  Frequency range DC to 9.5 GHz (electrical, -3 dB)  Selectable reference re

Instruction Manual 922562-00 Rev A 3 Safety Information Symbols These symbols appear on the product or in this manual to alert you to important inform